Sign in
User ID: Password:
Computers & Parts
Product Detail

EnGenius Networking ENS620EXT Outdoor 11ac Wave 2 Dual-Band Wireless AC1300 Access Point


Brief Description:

2.4GHz+5GHz 11 ac/b/g/n dual band concurrent AP (AP/CB/WDS), 2Tx+2Rx: 400 + 866Mbps, 2 x 10/100/1000Mbps LAN port, High Power 26dBm @ 2.4GHz, 26 dBm @ 5 GHz, 4 x External SMA Omni antenna, 24V PoE, MU-MIMO, Beamforming




 Higher Speeds for Multi-User Support
The ENS620EXT offers the next generation of 11ac Wave 2 speed and performance for wireless access points with increased speeds and network user capacities. Support the newest 11ac Wave 2 Multi-User MIMO (MU-MIMO) smartphones, laptops, and other mobile devices with AC1300 network speeds for bandwidth-heavy applications. Multi-MIMO sends multiple streams to several devices simultaneously expanding the total bandwidth and capacity of the network. 

Future Proof, Crowd Proof Networks
The ENS620EXT allows network administrators to utilize the most advanced Wi-Fi technology standard available while supporting the future of mobile technology for their users. The AP handles crowded outdoor client environments through its two spatial, MU-MIMO streams and Beamforming technology, which focuses signals directly to client devices, providing optimal signal and reception reliability for users. 

Exceptional Performance in Harsh Outdoor Climates
Designed for peak performance in harsh climates, the ENX620EXT features an IP55-rated weatherproof and dustproof enclosure ensuring it can withstand harsh outdoor and indoor environments. This includes prolonged exposure outdoors to sunlight, extreme cold, frost, snow, rain, hail, heat, and humidity, and indoors where temperature is a factor. 

Gigabit Ethernet PoE Port Supports Flexible Power Options
Connect and power the ENS620EXT via its Gigabit Power-over-Ethernet (PoE) port in locations where power outlets are limited or unavailable, such as under the eaves of roofs, on light poles or in other remote locations. Utilize the secondary Gigabit pass-through port to connect an additional network device such as an IP surveillance camera or access point/bridge for greater outdoor deployment flexibility. 



Technical Specifications
IEEE 802.11b/g/n on 2.4GHz 
IEEE802.11a/n/ac on 5GHz 
Four (4) External 5 dBi Dual Band Omni-Directional Antenna 
  Physical Interface
2 x 10/100/1000 Gigabit Ethernet Ports 
(Link Aggregation achieves 2 Gbps Throughput) 
1 x Reset Button
  LED Indicators 
1 x Power 
1 x LAN 1 
1 x LAN 2 
1 x 2.4 GHz 
1 x 5 GHz
  Power Source 
Power-over-Ethernet: Proprietary 24V PoE
IEEE 802.11e Compliant Source
  Maximum Power Consumption
  Surge Protection
  ESD Protection
Contact: 4KV
Air: 8 KV
  Wireless and Radio Specifications
Operating Frequency 
Dual-Radio Concurrent 2.4GHz and 5 GHz
  Operation Modes
Access Point Mode (AP mode) 
Client Bridge Mode (CB Mode) 
WDS: WDS AP, WDS Bridge, WDS Station
  Frequency Radio
2.4GHz: 2400 MHz to 2835 MHz 
5GHz: 5150 MHz to 5250 MHz, 5250 MHz to 5350 MHz, 5470 MHz to 5725 MHz, 5725MHz to 5850MHz
  Transmit Power
2.4 GHz: 27 dBm
5 GHz: 27 dBm
  Tx Beamforming (TxBF)
  Radio Chains/Spatial Stream
Two (2) Spatial Stream SU-MIMO up to 1267 Mbps to a single client
Two (2) Spatial Stream MU-MIMO up to 867 Mbps to two (2) wireless devices simultaneously
  Supported Data Rates (Mbps) 
2.4 GHz: Max 400 
5 GHz: Max 867 
802.11b: 1, 2, 5.5, 11 
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 
802.11n: 6.5 to 400 Mbps (MCS0 to MCS15) 
802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS 1 to 2)
  Supported Radio Technologies
802.11b: Direct-Sequence Spread Spectrum (DSSS) 
802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM) 
802.11n/ac: 2x2 MIMO with 2 Streams
802.11ac supports very high throughput (VHT) - VHT 20/40/80 MHz 
802.11n supports high throughput (HT) - HT 20/40 MHz 
802.11n supports very high throughput (VHT) under the 2.4 GHz radio - VHT (256-QAM) 
802.11n/ac packet aggregation: AMPDU, ASPDU
  Supported Modulation
802.11b: BPSK, QPSK, CCK 
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Multiple BSSID
Supports 16 SSIDs (8 SSIDs per band)
  VLAN Tagging
Supports 802.1q SSID-to-VLAN Tagging 
Cross-band VLAN Pass Through 
Management VLAN
  QoS (Quality of Service) 
Complaint with IEEE 802.11e Standard
  Band Steering
RSSI Threshold 
Traffic Shaping 
Save Configuration as Default 
Auto Transmit Power 
Auto Channel Selection 
Site Survey 
PMK Caching
  Control Features
Distance Control (ACK Timeout) 
Multicast Supported 
Fast Roaming 
Email Alerts 
Wi-Fi Scheduler 
Client Traffic Status 
Guest Network 
RADIUS Accounting 
Power Save Mode (U-APSD Support) 
CLI Support
v1, v2c, v3
I/II, Private MIB
  Wireless Security
WEP Encryption 64/128/152 bit 
WPA/WPA2 Enterprise (WPA-EAP using TKIP or AES) 
Hide SSID in Beacons 
MAC Address Filtering, Up to 64 MACs per SSID 
Wireless STA (Client) Connected List 
Client Isolation
  Environmental and Physical
Temperature Range 
Operating: -4o to 140oF/-20oC to 60o
Storage: -22Fo to 176oF/-30oC to 80oC
  Humidity (non-condensing) 
Operating: 90% or less 
Storage: 90% or less
IP55-Rated Enclosure
  Package Contents 
ENS620EXT Dual-Band AC1300 Outdoor Access Point 
PoE Injector (EPA2410GP) 
Pole Mounting Bracket 
RJ-45 Ethernet Cable 
Quick Installation Guide
  Item Dimension (L inchxW inchxH inch)
10 x 13 x 4

4.00 lb

Warranty Information
1 Year